In addition to cleaning and sanitizing, many homeowners and roofers take care of mold removal in order to prevent further contamination. Cleaning your house is necessary to prevent the mold from spreading. Removing the mold takes a major chunk out of your roof. Therefore, it would be very beneficial if you could remove it in the first place.
Removal of mold can be a tricky affair. The mold has to be extracted from the roof above the window for the best results. There are a number of methods that you can try, and in this article, we will talk about some of them. You can also choose to do the mold removal yourself, but there are a few risks that you may incur. Even if you use the most effective method, you will be responsible for causing the damage to the roof after it is done.
Why Mold Grows on Roof
There are a number of reasons why mold grows on your roof. These include building materials not being properly maintained, direct sunlight being shorted for improperly installed windows, and faulty heating systems. There is also the question of whether you need to take remedial action to make the problem disappear.
You may have noticed that mold can grow on your roof if there is a lot of sunlight. While it can grow in both hot and cold climates, it does prefer places where there is little or no shade. In summer, if you have tall trees, the sun will be focused on them, producing heat, thus producing mold spores. Avoid areas where the sun’s rays are weak or hard to avoid.
If you have windows with improperly ventilated holes, the indoor air coming in through these windows can quickly become extremely warm, as hot sunshine warms the air inside. Without proper ventilation, this warm air may become stagnant and begin to cause mold growth. Before you buy a house, check the insides of the house for excessive dampness.
Excessive moisture can contribute to mold growth, and if it is too much, you could find yourself in hot water. If the roof is always dry, the mold and fungi will begin to die off. If it is humid, however, they will not stop growing.
What You Can Do
Your roofs need maintenance in order to stay as clean as possible. Dust mites can multiply rapidly on a poorly ventilated roof. If left unchecked, they can become a problem.
This can happen if you live in an apartment with no attic and have to raise your roof to get access to your roof. If you have a wood or metal roof and have a shingle siding, you can easily do this yourself with a specialized paver to lie down over the sides of the wood.
If you have a completely metal roof and have sealed the edges, you can seal it with silicone to keep mold from growing. Also, have all holes filled and all obstructions plugged to avoid moisture. Air filters can be added if you have pets or kids running around, which will help prevent mold from growing.
The windows should be kept properly shut, especially during the summer, when windows are opened to let in the fresh air, but closed when the heat of the sun begins to get high. Heat rises, and heat rises are what causes mold to grow.
Next, make sure that the window air is constantly circulating. The air should be moving freely within the house, without having to walk past closed windows. Some places that tend to attract mold are those with windows that are only partially or fully shut.
While there are a number of reasons why mold grows on your roof, prevention is the best way to prevent problems from getting out of hand. Keep your roof as clean as possible by regularly cleaning it. Remember, prevention is the best cure.
First, if there is already damage to the roof, it would be impossible to remove the mold. If it is too late, then your roof would have to be repaired. It would then be obvious that you should have the mold removal done by the best mold removal company available.
Why Hire a Professional?
There are many ways to eliminate mold. If you have spots on your roof where mold can become visible, you may want to take them in for treatment by a professional. You can do this at home, or you can seek the advice of a contractor who will be able to give you a good idea of how to handle the situation.
The best way to remove the mold is to go to a professional roofing Washington Township NJ company and request for them to come and extract the mold. However, before asking them to do it, you need to make sure that there is already mold in the roof, and you cannot do anything to remove it.
Before the removal is done, you can tell them that there is a specific mold, and you can’t remove it. This is because the expert roofing companies usually have extensive knowledge in removing different types of mold. The company will be able to suggest the best method and the best time to do the job.
They will then come and extract the mold using the proper equipment. The first method used is using steam or water. Depending on the type of mold, this method may not work as well as other methods.
The company will come and tell you that they need you to stop pouring the water into the area where the mold is growing. So, it is obvious that the water will have to be left at the surface, just like in a normal cleaning job. It may be of no use at all because the mold spores are present on the roof so deep that water will still not be able to reach them.
It will require hours for the roof to dry up, and you will need to leave it for days. In some cases, the roofing will have to be repaired, and the cost of the mold removal will be on the high side. For those homeowners who have a large house or a big roof, this may not be an option for them.
And the most important thing to know is that there are many other factors that contribute to good mold removal. You can find more information regarding the mold removal methods that are available, through the help of your family member or a good roofing expert.